 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MBRD320, MBRD330, MBRD340, MBRD350, MBRD360 MBRD320, MBRD340 and MBRD360 are Preferred Devices SWITCHMODEt Power Rectifiers DPAK Surface Mount Package Designed for use as output rectifiers, free wheeling, protection and steering diodes in switching power supplies, inverters and other inductive switching circuits. These state-of-the-art devices have the following features: Features http://onsemi.com SCHOTTKY BARRIER RECTIFIERS 3.0 AMPERES, 20 - 60 VOLTS 1 4 * * * * Pb-Free Packages are Available Extremely Fast Switching Extremely Low Forward Drop Platinum Barrier with Avalanche Guardrings 3 MARKING DIAGRAM 4 12 3 DPAK CASE 369C Mechanical Characteristics * Case: Epoxy, Molded * Weight: 0.4 Gram (Approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal * * * Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes; 260C Max. for 10 Seconds Shipped 75 Units Per Plastic Tube Available in 16 mm Tape and Reel, 2500 Units Per Reel, by Adding a "T4'' Suffix to the Part Number YWW B 3x0 Y WW x = Year = Work Week = 2, 3, 4, 5 or 6 ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 3 of this data sheet. Preferred devices are recommended choices for future use and best overall value. (c) Semiconductor Components Industries, LLC, 2004 1 December, 2004 - Rev. 4 Publication Order Number: MBRD320/D MBRD320, MBRD330, MBRD340, MBRD350, MBRD360 MAXIMUM RATINGS MBRD Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (TC = +125C, Rated VR) Peak Repetitive Forward Current, TC = +125C (Rated VR, Square Wave, 20 kHz) Nonrepetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) Peak Repetitive Reverse Surge Current (2 ms, 1 kHz) Operating Junction Temperature Range Storage Temperature Range Voltage Rate of Change (Rated VR) Symbol VRRM VRWM VR IF(AV) IFRM IFSM IRRM TJ Tstg dv/dt 320 20 330 30 340 40 350 50 360 60 Unit V 3 6 75 1 -65 to +150 -65 to +175 10,000 A A A A C C V/ms Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS Maximum Thermal Resistance, Junction-to-Case Maximum Thermal Resistance, Junction-to-Ambient (Note 1) RqJC RqJA 6 80 C/W C/W ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (Note 2) iF = 3 Amps, TC = +25C iF = 3 Amps, TC = +125C iF = 6 Amps, TC = +25C iF = 6 Amps, TC = +125C Maximum Instantaneous Reverse Current (Note 2) (Rated dc Voltage, TC = +25C) (Rated dc Voltage, TC = +125C) 1. Rating applies when surface mounted on the minimum pad size recommended. 2. Pulse Test: Pulse Width = 300 ms, Duty Cycle 2.0%. VF 0.6 0.45 0.7 0.625 iR 0.2 20 mA V http://onsemi.com 2 MBRD320, MBRD330, MBRD340, MBRD350, MBRD360 ORDERING INFORMATION Device MBRD320 MBRD320G MBRD320RL MBRD320RLG MBRD320T4 MBRD320T4G MBRD330 MBRD330RL MBRD330T4 MBRD340 MBRD340G MBRD340RL MBRD340RLG MBRD340T4 MBRD340T4G MBRD350 MBRD350RL MBRD350T4 MBRD360 MBRD360G MBRD360RL MBRD360RLG MBRD360T4 MBRD360T4G Package DPAK DPAK (Pb-Free) DPAK DPAK (Pb-Free) DPAK DPAK (Pb-Free) DPAK DPAK DPAK DPAK DPAK (Pb-Free) DPAK DPAK (Pb-Free) DPAK DPAK (Pb-Free) DPAK DPAK DPAK DPAK DPAK (Pb-Free) DPAK DPAK (Pb-Free) DPAK DPAK (Pb-Free) Shipping 75 Units / Rail 75 Units / Rail 1800 Tape & Reel 1800 Tape & Reel 2500 Tape & Reel 2500 Tape & Reel 75 Units / Rail 1800 Tape & Reel 2500 Tape & Reel 75 Units / Rail 75 Units / Rail 1800 Tape & Reel 1800 Tape & Reel 2500 Tape & Reel 2500 Tape & Reel 75 Units / Rail 1800 Tape & Reel 2500 Tape & Reel 75 Units / Rail 75 Units / Rail 1800 Tape & Reel 1800 Tape & Reel 2500 Tape & Reel 2500 Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 3 MBRD320, MBRD330, MBRD340, MBRD350, MBRD360 TYPICAL CHARACTERISTICS 100 100 40 20 10 4.0 2.0 1.0 0.4 0.2 0.1 TJ = 150C 125C 100C 75C i F, INSTANTANEOUS FORWARD CURRENT (AMPS) I R , REVERSE CURRENT (mA) 10 0.04 0.02 0.01 0.004 0.002 0.001 25C 0 10 40 20 30 50 VR, REVERSE VOLTAGE (VOLTS) 60 70 150C TJ = 25C 125C *The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these curves if VR is sufficient below rated VR. Figure 2. Typical Reverse Current PF(AV) , AVERAGE POWER DISSIPATION (WATTS) 10 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10 IPK/IAV = 20 TJ = 150C 10 dc SQUARE WAVE 5 SINE WAVE 75C 1.0 0.1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 vF, INSTANTANEOUS VOLTAGE (VOLTS) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 1. Typical Forward Voltage Figure 3. Average Power Dissipation http://onsemi.com 4 MBRD320, MBRD330, MBRD340, MBRD350, MBRD360 I F(AV) , AVERAGE FORWARD CURRENT (AMPS) RATED VOLTAGE APPLIED RqJC = 6C/W SINE WAVE OR SQUARE WAVE TJ = 150C I F(AV) , AVERAGE FORWARD CURRENT (AMPS) 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 80 90 100 110 120 130 140 150 160 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0 20 40 60 80 100 120 140 160 TJ = 125C TJ = 150C dc SQUARE WAVE OR SINE WAVE VR = 25 V TJ = 150C RqJA = 80C/W SURFACE MOUNTED ON MIN. PAD SIZE RECOMMENDED dc TC, CASE TEMPERATURE (C) TA, AMBIENT TEMPERATURE (C) Figure 4. Current Derating, Case Figure 5. Current Derating, Ambient 1K 700 500 C, CAPACITANCE (pF) 300 200 100 70 50 30 20 10 TJ = 25C 0 10 20 30 40 50 60 70 VR, REVERSE VOLTAGE (VOLTS) Figure 6. Typical Capacitance http://onsemi.com 5 MBRD320, MBRD330, MBRD340, MBRD350, MBRD360 PACKAGE DIMENSIONS DPAK CASE 369C ISSUE O NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. INCHES MIN MAX 0.235 0.245 0.250 0.265 0.086 0.094 0.027 0.035 0.018 0.023 0.037 0.045 0.180 BSC 0.034 0.040 0.018 0.023 0.102 0.114 0.090 BSC 0.180 0.215 0.025 0.040 0.020 --- 0.035 0.050 0.155 --- MILLIMETERS MIN MAX 5.97 6.22 6.35 6.73 2.19 2.38 0.69 0.88 0.46 0.58 0.94 1.14 4.58 BSC 0.87 1.01 0.46 0.58 2.60 2.89 2.29 BSC 4.57 5.45 0.63 1.01 0.51 --- 0.89 1.27 3.93 --- -T- B V R 4 SEATING PLANE C E A S 1 2 3 Z U K F L D G 2 PL J H 0.13 (0.005) T DIM A B C D E F G H J K L R S U V Z M SOLDERING FOOTPRINT* 6.20 0.244 2.58 0.101 5.80 0.228 1.6 0.063 6.172 0.243 3.0 0.118 SCALE 3:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. SWITCHMODE is a trademark of Semiconductor Components Industries, LLC (SCILLC). ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. http://onsemi.com 6 MBRD320/D |
Price & Availability of MBRD360T4
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |